4AppsApk.com의 최신 버전을 제공하려고 "Ampere Pro v1.50 Final Apk" 당신의 안드로이드 전화에 대한. 이 응용 프로그램은 안드로이드 앱 카테고리에 속하는. 이 APK 파일은 지난 11 월에 업데이트 1, 2018 ...에서 9:35 오전. 선택하고 아래의 직접 다운로드 링크에서 다운로드에 대한 APK 파일을 가져 시작 "Ampere Pro v1.50 Final Apk", 그리고 당신의 안드로이드 전화의 SD 카드에 파일을 이동하고 검색 및 설치하기를 원하는 경우 하나의 파일 관리자를 사용하여. 당신은 안드로이드가 필요합니다 4.0.3 버전 이상이 응용 프로그램을 설치하려면.
Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? 지금, you can prove this with Ampere Pro.
Measure the charging and discharging current of your battery.
The app works on 기계적 인조 인간 4.0.3+ 장치. Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
Start the app and wait ca. 10 초 (“measuring” is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
– Charger (USB/AC/Wireless)
– USB cable
– Phone type
– Current tasks running
– Display brightness
– WiFi state
– GPS state
Please don’t use the readings on this app as concrete science. 하나, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If your Lollipop device (이상) shows 0 all the time, please use the settings option “Old measurement method”. You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don’t give correct (measured) values (예를 들면: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
About notification and background measurement:
– The measurement works in the background only if you switch on the notification in the settings.
– You can hide the notification icon by setting the notification priority to minimum.
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even just zero which means, that the Android system provides such unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
Phones/ROMS compatible only with “Old measurement method” switched on and selected the right “Measurement interface”:
➤ HTC One M7 / M8
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime – fortuna3gdtv
➤ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 – d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 – degas3g
➤ HTC Desire 510 – htc_a11ul8x26
➤ HTC One S (ville), 엑스 (endeavoru), XL (evita)
➤ HTC Sensation 4G – pyramid
WHAT 'S NEW
* 새로운: Battery alerts for the device and Android Wear
* 새로운: Korean language added
* Language updates
* 버그 수정
필요한 Android: 4.0 최대
- 구글 Play 스토어에서 더 많은 정보를 원하시면
- Ampere Pro v1.50 Final Apk